Двухголовая экструзионная линия

Все машины оснащены:

  • Защита от холодного запуска;
  • Счётчик метража;
  • Банана вал;
  • Авто поддув рукава

Опционное оборудование:

  • Миксеры полимерного сырья,
  • Автозагрузчики;
  • Коронаторы;
  • Горячий нож;
  • и т. Д.
  • *Все машины можно скомплектовать по Вашему индивидуальному техническому заданию.

    DM75-800 Twin Head Blown Film Machine

    Extrusion Unit   (with water cooling device on feed hopper)
    Screw Ø 75 mm; L/D ratio 30/1
    Material: SACM-645 nitride treatment, polished
    Barrel Material: SACM-645 nitride treatment, honed polished
    Auto Thermal controller: 4 points
    Barrel Cooling Blower 4 sets
    Main driving motor 55kw AC +inverter control
    Twin Die Heads HDPE Ø100 mm + Ø60 mm 1 1/2 set, spiral type, X 2 sets
    Air Ring Alum. alloyed, specifically designed for stable cooling,
    X 2 sets
    Air Ring Cooling Blower 5 HP X 2 sets
    Gear Box Made with FC25, with lubrication and cooling system
    Gear Material SCM-21 carbon treat & gear face ground
    Filter Long life type
    Take-up Unit X 2 sets (Adjustable, with pneumatic nip roller, good working platform, wooden collapsing frame with gusseting board, bubble stabilizer)
    Take-up Height 5.5 M
    Take-up Roller 160 mm dia. X 800 mm (L)
    Take up Motor 1set + reducer with coupling
    Winding Unit X 2 sets (Surface friction manual type)
    Surface friction roller 250 mm dia. X 800 mm (L)
    Winding motor 1set + reducer with coupling
    Banana roller 2 sets
    Winding reel 4 pcs
    Control Panel: SSR control
    Standard Spare Parts To Be Supplied With The Machine:
    Heater Band: 1pc for each size & 2 pcs for barrel Temperature Controller x 1pc
    Magnetic Contactor x 1pc SSR x 1pc
    Thermocouple x 1pcs Illuminated Push Button Switch x 1pc
    Push Button Switch x 1pc Amp meter x 1pc
    Rocker Switch x 1pc Selector Switch x 1pc
    Oil Seal x 1 set Fuse x 1pc

    DM55-750 Twin Head Blown Film Machine

    Extrusion Unit   (with water cooling device on feed hopper)
    Screw Ø 55 mm; L/D ratio 30/1
    Material: SACM-645 nitride treatment, polished
    Barrel

    Material: SACM-645 nitride treatment, honed polished
    Auto Thermal controller: 3 points
    Barrel Cooling Blower 1/4 HP x 2 sets + 1/2 HP x 1 set
    Main driving motor 30kw AC +inverter control
    Twin Die Heads HDPE Ø80 mm + Ø60 mm 1 1/2 set, spiral type, X 2 sets
    Air Ring Alum. alloyed, specifically designed for stable cooling,
    X 2 sets
    Air Ring Cooling Blower 5 HP X 2 sets
    Gear Box Made with FC25, with lubrication and cooling system
    Gear Material SCM-21 carbon treat & gear face ground
    Filter Long life type
    Take-up Unit X 2 sets (Adjustable, with pneumatic nip roller, good working platform, wooden collapsing frame with gusseting board, bubble stabilizer)
    Take-up Height 5.5 M
    Take-up Roller 160 mm dia. X 750 mm (L)
    Take up Motor 1set + reducer with coupling
    Winding Unit X 2 sets (Surface friction manual type)
    Surface friction roller 250 mm dia. X 750 mm (L)
    Winding motor 1set + reducer with coupling
    Banana roller 2 sets
    Winding reel 4 pcs
    Control Panel: SSR control
    Standard Spare Parts To Be Supplied With The Machine:
    Heater Band: 1pc for each size & 2 pcs for barrel Temperature Controller x 1pc
    Magnetic Contactor x 1pc SSR x 1pc
    Thermocouple x 1pcs Illuminated Push Button Switch x 1pc
    Push Button Switch x 1pc Amp meter x 1pc
    Rocker Switch x 1pc Selector Switch x 1pc
    Oil Seal x 1 set Fuse x 1pc
    Drive Belt x 1 set Standard Tool box x 1 set

    Остались вопросы

    Ваша заявка успешно отправлена
    Мы свяжемся с вами в ближайшее время
    Нажимая кнопку «Отправить», я даю свое согласие на обработку моих персональных данных